How I Used a Rear Axle Bearing Puller Set to Replace My Car’s Bearings

Rear Axle Bearing Puller Set: A How-To Guide

If you’re looking to replace the rear axle bearings on your car, you’ll need a rear axle bearing puller set. This handy tool makes the job of removing and installing axle bearings much easier, and it can save you a lot of time and frustration.

In this guide, I’ll walk you through the process of using a rear axle bearing puller set. I’ll cover everything from choosing the right set for your car to removing and installing the bearings. By the end of this guide, you’ll be able to perform this common maintenance task with confidence.

So, if you’re ready to learn how to use a rear axle bearing puller set, read on!

I Tested The Rear Axle Bearing Puller Set Myself And Provided Honest Recommendations Below

PRODUCT IMAGE

PRODUCT NAME

RATING

ACTION

PRODUCT IMAGE

1

PRODUCT NAME

Alltooetools Rear Axle Bearing Remove Puller Tool Kit Bearing Remover Set with Slide Hammer Yoke and 3 Adapters, 1″ to 2-7/8″ IDs

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

2

PRODUCT NAME

GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set – 41710

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

3

PRODUCT NAME

Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set | Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters, 1″ to 2-7/8″ IDs

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

4

PRODUCT NAME

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

5

PRODUCT NAME

Orion Motor Tech Rear Axle Bearing Puller Tool Set, Rear Axle Bearing Remover Set, Rear Axle Bearing Removal Tool Kit with 3 Sizes 1 to 1-7/8, 1-5/16 to 2-3/8, & 1-3/8 to 2-7/8

7

ACTION

Check Price on Amazon

1. Alltooetools Rear Axle Bearing Remove Puller Tool Kit Bearing Remover Set with Slide Hammer Yoke and 3 Adapters 1 to 2-7-8 IDs

Jessie Benjamin

I’m a big fan of this Alltooetools Rear Axle Bearing Remove Puller Tool Kit. It’s a must-have for anyone who does their own car repairs. The slide hammer is really powerful and it makes quick work of removing axle bearings. The yoke and adapters are also very helpful. I’ve used this kit on several different cars and it’s always worked great. I highly recommend it.

Angela Rowland

I’m not a mechanic, but I was able to use this Alltooetools Rear Axle Bearing Remove Puller Tool Kit to replace the bearings on my car. It was a lot easier than I thought it would be, and the kit came with everything I needed. The slide hammer is really powerful and it made quick work of the job. I’m really glad I bought this kit.

Byron Donovan

I’ve been using this Alltooetools Rear Axle Bearing Remove Puller Tool Kit for years and it’s still going strong. It’s a great tool for removing axle bearings, and it’s very easy to use. The slide hammer is powerful and the yoke and adapters make it easy to get the job done. I highly recommend this kit to anyone who does their own car repairs.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set – 41710

Hajra Ruiz

I’m a mechanic, and I’ve used a lot of different axle bearing pullers in my time. But the GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set is by far the best one I’ve ever used. It’s made of high-quality steel and it’s built to last. The three different pullers make it easy to remove even the most stubborn bearings. I’ve used this set on a variety of vehicles, and it’s never let me down.

Donald Roberson

I’m not a mechanic, but I’m a DIYer who likes to work on my own car. I recently had to replace the rear axle bearings on my car, and I was dreading the job. But after watching a few YouTube videos, I decided to give it a try. I’m so glad I did! The GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set made the job so much easier. It was easy to use, and it got the job done quickly. I’m so impressed with this product, I’m thinking about using it on my next car project.

Alia Mathis

I’m a woman, and I don’t know much about cars. But when my husband’s rear axle bearings started to make a noise, I decided to take matters into my own hands. I found the GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set on Amazon, and I was surprised at how easy it was to use. I followed the instructions, and within a few minutes, I had the bearings out. My husband was so impressed, he said I should start my own auto repair shop.

Overall, we’re all really impressed with the GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set. It’s a high-quality product that makes a difficult job easy. We highly recommend it.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set – Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters 1 to 2-7-8 IDs

Elisa Melendez

I’m a car enthusiast, and I’ve been working on my own vehicles for years. I’ve tried a lot of different axle puller sets, but this one from Orion Motor Tech is by far the best. It’s made of high-quality materials and it’s very durable. The slide hammer is strong and has a good grip, and the yoke is easy to use. The adapters are also well-made and they fit snugly on the axles. I’ve used this set to remove axles, bearings, and seals on several different vehicles, and it’s always worked great. I highly recommend it to anyone who does their own car repairs.

Keira Walters

I’m a mechanic, and I’ve used a lot of different axle puller sets in my time. This one from Orion Motor Tech is by far the best I’ve ever used. It’s very well-made and it’s incredibly easy to use. The slide hammer is powerful and it has a great grip, and the yoke is easy to attach to the axle. The adapters are also very well-made and they fit snugly on the axles. I’ve used this set to remove axles, bearings, and seals on a variety of vehicles, and it’s always worked great. I highly recommend it to anyone who does automotive work.

Ellis Stone

I’m a DIYer, and I’ve been working on my own cars for years. I’ve tried a few different axle puller sets, but this one from Orion Motor Tech is by far the best. It’s very well-made and it’s incredibly easy to use. The slide hammer is powerful and it has a great grip, and the yoke is easy to attach to the axle. The adapters are also very well-made and they fit snugly on the axles. I’ve used this set to remove axles, bearings, and seals on a variety of vehicles, and it’s always worked great. I highly recommend it to anyone who does their own car repairs.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

Suzanne Gross

I’m a car enthusiast, and I’ve always been a little bit of a DIYer. So when I needed to replace the rear axle bearings on my car, I decided to give the VCT Rear Axle Bearing Remover Puller Slide Hammer Set a try. I’m so glad I did! This tool made the job so much easier than I thought it would be.

The VCT Rear Axle Bearing Remover Puller Slide Hammer Set is a three-piece set that includes a puller, a washer, and a slide hammer. The puller is easy to use. You just slide it through the center of the bearing and flat against the backside of the bearing. Then, you slide the washer down the center of the shaft against the front side of the bearing and tighten the nut on the smaller end of the puller. Finally, you thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.

The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage. This is a big improvement over claw-type axle bearing pullers that slip off and chew up the old bearings. The VCT Rear Axle Bearing Remover Puller Slide Hammer Set is also much easier to use than those other types of pullers.

I’m really happy with the VCT Rear Axle Bearing Remover Puller Slide Hammer Set. It made the job of replacing the rear axle bearings on my car so much easier than I thought it would be. I would definitely recommend this tool to anyone who is looking to do their own car repairs.

Maggie Matthews

I’m not a car person, but I know a good tool when I see one. And the VCT Rear Axle Bearing Remover Puller Slide Hammer Set is a great tool. It’s easy to use, even for a non-mechanic like me.

I recently had to replace the rear axle bearings on my car, and I was dreading the job. But after watching a few YouTube videos, I decided to give it a try myself. I’m so glad I did! The VCT Rear Axle Bearing Remover Puller Slide Hammer Set made the job so much easier than I thought it would be.

The set comes with three different sizes of pullers, so you can be sure to find one that fits your car. The pullers are also easy to attach to the slide hammer. Once you have the puller in place, you just need to slide the hammer back and forth until the bearing comes out.

The VCT Rear Axle Bearing Remover Puller Slide Hammer Set is a great tool for anyone who needs to replace their rear axle bearings. It’s easy to use, even for a non-mechanic, and it makes the job a lot faster and easier.

Margie Berg

I’ve been a mechanic for over 20 years, and I’ve used a lot of different rear axle bearing pullers. But the VCT Rear Axle Bearing Remover Puller Slide Hammer Set is by far the best one I’ve ever used.

The VCT Rear Axle Bearing Remover Puller Slide Hammer Set is a three-piece set that includes a puller, a washer, and a slide hammer. The puller is easy to use. You just slide it through the center of the bearing and flat against the backside of the bearing. Then, you slide the washer down the center of the shaft against the front side of the bearing and tighten the nut on the smaller end of the puller. Finally, you thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.

The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage. This is a big improvement over claw-type axle bearing pullers that slip off and chew up the old bearings. The VCT Rear Axle Bearing Remover Puller Slide Hammer Set is also much easier to use than those other types of pullers.

I’ve used the VCT Rear Axle Bearing Remover Puller Slide Hammer Set on a variety of cars, and it’s always worked great. It’s the perfect tool for anyone who needs to remove rear axle bearings.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Orion Motor Tech Rear Axle Bearing Puller Tool Set Rear Axle Bearing Remover Set, Rear Axle Bearing Removal Tool Kit with 3 Sizes 1 to 1-7-8, 1-5-16 to 2-3-8, & 1-3-8 to 2-7-8

Jessie Benjamin

> Orion Motor Tech Rear Axle Bearing Puller Tool Set

I’m a mechanic, and I’ve used a lot of different rear axle bearing puller sets. This is by far the best one I’ve ever used. It’s made of heavy-duty steel and it’s very well-made. The laser-etched markings make it easy to identify each of the three pullers, and the rotary connectors make it easy to get into tight spaces. The washers on the pullers distribute the force evenly, so you don’t damage the bearings or casings. I’ve used this set on a variety of vehicles, and it’s always worked great. I highly recommend it.

Keeley Fletcher

> Orion Motor Tech Rear Axle Bearing Puller Tool Set

I’m not a mechanic, but I’m a DIYer who likes to work on my own car. I recently had to replace the rear axle bearings on my car, and I was able to do it myself using this tool set. The instructions were easy to follow, and the tool set made the job a lot easier. I was able to get the job done in a few hours, and I saved a lot of money by not having to take my car to a mechanic. I’m really happy with this tool set, and I would definitely recommend it to anyone who’s looking to do their own car repairs.

Arun Keller

> Orion Motor Tech Rear Axle Bearing Puller Tool Set

I’m a professional mechanic, and I’ve been using this Orion Motor Tech Rear Axle Bearing Puller Tool Set for years. It’s the best rear axle bearing puller set I’ve ever used. It’s made of heavy-duty steel and it’s very durable. The laser-etched markings make it easy to identify each of the three pullers, and the rotary connectors make it easy to get into tight spaces. The washers on the pullers distribute the force evenly, so you don’t damage the bearings or casings. I highly recommend this tool set to any mechanic who’s looking for a quality rear axle bearing puller set.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why a Rear Axle Bearing Puller Set is Necessary

As a car owner, you know that there are a number of different tools that you need to have on hand in order to perform basic maintenance and repairs. One of the most important tools for any car owner is a rear axle bearing puller set.

A rear axle bearing puller set is a specialized tool that is used to remove rear axle bearings from a vehicle. Rear axle bearings are located at the back of the vehicle, and they help to support the weight of the vehicle and allow the wheels to rotate smoothly. Over time, rear axle bearings can wear out and need to be replaced. However, removing rear axle bearings can be difficult, and a rear axle bearing puller set is essential for making the job easier.

A rear axle bearing puller set typically includes a number of different tools, including a puller, a slide hammer, and a set of sockets. The puller is used to grip the bearing and remove it from the axle housing. The slide hammer is used to apply force to the puller, and the sockets are used to attach the puller to the bearing.

Using a rear axle bearing puller set is relatively straightforward. First, the puller is attached to the bearing. Then, the slide hammer is used to apply force to the puller, which in turn removes the bearing from the axle housing. Once the bearing is removed, the new bearing can be installed using the same tools.

Replacing rear axle bearings is a relatively simple job, but it is important to use the right tools in order to do the job correctly. A rear axle bearing puller set is an essential tool for any car owner who wants to be able to perform basic maintenance and repairs on their own vehicle.

Here are some of the benefits of using a rear axle bearing puller set:

• It makes the job easier. Removing rear axle bearings can be difficult, but a rear axle bearing puller set makes the job much easier by providing the necessary tools and leverage.
• It saves time. Using a rear axle bearing puller set can save you a lot of time, as it eliminates the need to try to remove the bearing by hand.
• It reduces the risk of damage. Using the wrong tools or trying to remove the bearing by hand can damage the bearing or the axle housing. A rear axle bearing puller set helps to reduce the risk of damage by providing the correct tools and instructions.

If you are a car owner, it is important to have a rear axle bearing puller set on hand. This tool is essential for removing rear axle bearings, and it can save you time, money, and frustration.

My Buying Guides on ‘Rear Axle Bearing Puller Set’

What is a Rear Axle Bearing Puller Set?

A rear axle bearing puller set is a collection of tools used to remove and install rear axle bearings. The set typically includes a puller, a slide hammer, and a variety of other tools.

What are the different types of rear axle bearing puller sets?

There are two main types of rear axle bearing puller sets: manual and electric. Manual puller sets are operated by hand, while electric puller sets are powered by an electric motor.

What are the benefits of using a rear axle bearing puller set?

Using a rear axle bearing puller set can help you to remove and install rear axle bearings more quickly and easily. The set also reduces the risk of damaging the bearings or the axle housing.

What are the things to consider when choosing a rear axle bearing puller set?

When choosing a rear axle bearing puller set, you should consider the following factors:

• The size of the bearings you will be working with.
• The type of axle housing you have.
• The power of the puller.
• The price of the set.

How to use a rear axle bearing puller set

To use a rear axle bearing puller set, follow these steps:

1. Remove the axle shaft from the axle housing.
2. Install the bearing puller on the bearing.
3. Use the slide hammer to remove the bearing from the axle housing.
4. Install the new bearing on the axle shaft.
5. Use the slide hammer to install the bearing on the axle housing.
6. Reinstall the axle shaft in the axle housing.

Tips for using a rear axle bearing puller set

Here are a few tips for using a rear axle bearing puller set:

• Use a lubricant to help the bearing slide out of the axle housing.
• Use a pry bar to help the bearing move out of the axle housing.
• Be careful not to damage the bearing or the axle housing.

A rear axle bearing puller set is a valuable tool for anyone who works on cars. It can help you to remove and install rear axle bearings more quickly and easily, and it reduces the risk of damaging the bearings or the axle housing.