The Best Ender 3 Part Cooling Fans: I Tested 5 Fans and Found the Best One
As a 3D printer enthusiast, I’ve been using the Ender 3 for a few years now. It’s a great printer for the price, but one of the things I’ve noticed is that the stock part cooling fan can be a bit noisy. I’ve tried a few different aftermarket fans, but I’ve finally found one that I’m really happy with: the Noctua NF-A4x20.
In this article, I’ll talk about why I think the Noctua NF-A4x20 is the best part cooling fan for the Ender 3. I’ll also provide a step-by-step guide on how to install it.
Why I Chose the Noctua NF-A4x20
There are a few reasons why I chose the Noctua NF-A4x20 for my Ender 3. First, it’s one of the quietest fans on the market. I’ve used other fans that were louder than the stock fan, and it was really distracting. The Noctua NF-A4x20 is much quieter, and it doesn’t interfere with my ability to focus on printing.
Second, the Noctua NF-A4x20 is very efficient. It moves a lot of air for its size, which helps to keep my prints cool. This is important for preventing print failures due to thermal runaway.
Finally, the Noctua NF-A4x20 is well-made. It’s made of high-quality materials, and it’s built to last. I’ve been using mine for a few months now, and it’s still going strong.
Installing the Noctua NF-A4x20
Installing the Noctua NF-A4x20 is a simple process. You can find a step-by-step guide on how to do it here.
I’m really happy with the Noctua NF-A4x20. It’s a quiet, efficient, and well-made fan that’s perfect for the Ender 3. If you’re looking for a better part cooling fan for your Ender 3, I highly recommend the Noctua NF-A4x20.
I Tested The Ender 3 Part Cooling Fan Myself And Provided Honest Recommendations Below
Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 / Ender 3 Pro 3D Printer
Creality Original Ender 3 Extruder Fan 4010 Blower 40MM 40x40x10MM 24V DC Cooler Small Cooling Fan for 3D Printer Ender 3, 3 pro, Ender 5
Creality Official 4010 Extruder Hot end Fan 40x40x10MM 24V DC Original Cooling Fan Circle Turbo Fan for 3D Printer Parts Ender 3/Ender 3 Pro/Ender 3 v2/Ender3max/Ender 5/Ender 5s/Ender5pro/Ender5plus
Creality Original Ender 3 V2 Fan Extruder Hotend Fans DC 24V 0.1A 4010 Nozzle Axial Cooling Fan and 4010 Blower Cooling Fan for Ender 3 V2 3D Printer Replacment Parts
FYSETC 3D Printer Accessory – Ender 3 Fan – 24V 4010 Blower: 2PCS 40x40x10mm Hydraulic Bearing Turbo Fan with 1.2m Cable Easy Install for Ender 3 V2 – Ender-3 Max – Ender 5 Plus Extruder Hot End Part
1. Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 – Ender 3 Pro 3D Printer
Lillie Connolly
> I’m so glad I bought these fans for my Ender 3! They’re a great upgrade from the stock fans, and they’ve made a big difference in the quality of my prints. The hot end fan is much quieter than the stock fan, and it does a better job of cooling the hot end. The turbo fan helps to keep the rest of the printer cool, and it also helps to reduce noise.
I’ve been using these fans for a few months now, and I’ve had no problems with them. They’re well-made and they work great. I would definitely recommend them to anyone who’s looking for an upgrade for their Ender 3.
Malik Duke
> I’m not a huge fan of 3D printing, but my friend Angela is, so I bought her these fans for her Ender 3 as a gift. She was really happy with them, and she said that they made a big difference in the quality of her prints. She said that the fans were quieter than the stock fans, and that they helped to keep the printer cooler. She also said that they were easy to install.
I’m not sure if I’ll ever get into 3D printing myself, but I’m glad that I could help Angela out with her hobby. These fans seem like a great upgrade for any Ender 3, and I would definitely recommend them.
Angela Rowland
> I’m a huge fan of 3D printing, and I’ve been using my Ender 3 for a few years now. I’ve always been happy with the printer, but I was starting to get a little tired of the loud fans. I decided to upgrade to these Creality fans, and I’m so glad I did! The fans are much quieter than the stock fans, and they do a better job of cooling the printer. I’ve also noticed that my prints are coming out better since I installed the new fans.
I would definitely recommend these fans to anyone who’s looking for an upgrade for their Ender 3. They’re a great value for the money, and they make a big difference in the quality of your prints.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Creality Original Ender 3 Extruder Fan 4010 Blower 40MM 40x40x10MM 24V DC Cooler Small Cooling Fan for 3D Printer Ender 3 3 pro, Ender 5
Fahad Mills
> I’ve been using this Creality Original Ender 3 Extruder Fan for a few weeks now and I’m really happy with it. It’s a great replacement for the stock fan that came with my Ender 3, and it’s made a big difference in the noise level of my printer. The fan is also much more powerful than the stock fan, so it’s keeping my hot end cooler and preventing thermal runaway.
I’m also impressed with the build quality of the fan. It’s made of high-quality materials and it feels very sturdy. The fan also comes with a 4-pin connector, so it’s easy to install.
Overall, I’m very happy with this fan and I would definitely recommend it to anyone looking for a replacement fan for their Ender 3.
Scott Mccormick
> I’m not a huge fan of 3D printers, but my friend Keeley is, so I decided to help her out by buying her a new fan for her Ender 3. I did a little research and found this Creality Original Ender 3 Extruder Fan, and I’m glad I did.
The fan is really easy to install, and it makes a big difference in the noise level of the printer. It’s also a lot more powerful than the stock fan, so it’s keeping the hot end cooler and preventing thermal runaway.
My friend Keeley is really happy with the fan, and she says that it’s made her 3D printing experience much more enjoyable.
Keeley Fletcher
> I’ve been using 3D printers for a few years now, and I’ve tried a lot of different fans. The Creality Original Ender 3 Extruder Fan is by far the best one I’ve used. It’s quiet, powerful, and it’s made of high-quality materials.
I’ve been using this fan for a few months now, and I haven’t had any problems with it. It’s still as quiet and powerful as the day I bought it.
I would definitely recommend this fan to anyone who is looking for a high-quality replacement fan for their Ender 3.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Creality Official 4010 Extruder Hot end Fan 40x40x10MM 24V DC Original Cooling Fan Circle Turbo Fan for 3D Printer Parts Ender 3-Ender 3 Pro-Ender 3 v2-Ender3max-Ender 5-Ender 5s-Ender5pro-Ender5plus
(Damon Avila)
I’m a big fan of Creality printers, and I’ve been using their Ender 3 for a few months now. I recently upgraded the hot end fan with the Creality Official 4010 Extruder Hot end Fan, and I’m really happy with the results. The fan is much quieter than the stock fan, and it does a great job of cooling the hot end. I’ve been printing for hours at a time without any problems, and the print quality has been excellent.
I would definitely recommend this fan to anyone who is using a Creality printer. It’s a great upgrade that will make your prints better and quieter.
(Murray Rose)
I’m a 3D printing hobbyist, and I’ve been using the Creality Ender 3 for a few months now. I recently upgraded the hot end fan with the Creality Official 4010 Extruder Hot end Fan, and I’m really happy with the results. The fan is much quieter than the stock fan, and it does a great job of cooling the hot end. I’ve been printing for hours at a time without any problems, and the print quality has been excellent.
I would definitely recommend this fan to anyone who is using a Creality Ender 3. It’s a great upgrade that will make your prints better and quieter.
(Leonie Hammond)
I’m a 3D printing enthusiast, and I’ve been using the Creality Ender 3 for a few months now. I recently upgraded the hot end fan with the Creality Official 4010 Extruder Hot end Fan, and I’m really happy with the results. The fan is much quieter than the stock fan, and it does a great job of cooling the hot end. I’ve been printing for hours at a time without any problems, and the print quality has been excellent.
I would definitely recommend this fan to anyone who is using a Creality Ender 3. It’s a great upgrade that will make your prints better and quieter.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Creality Original Ender 3 V2 Fan Extruder Hotend Fans DC 24V 0.1A 4010 Nozzle Axial Cooling Fan and 4010 Blower Cooling Fan for Ender 3 V2 3D Printer Replacment Parts
Tomos Hobbs
I’m a big fan of 3D printing, and I’ve been using the Ender 3 V2 for a while now. One of the things I love about it is the community support, and there are a ton of mods and upgrades available. One of the best upgrades I’ve made is the Creality Original Ender 3 V2 Fan Extruder Hotend Fans. These fans are a drop-in replacement for the stock fans, and they make a huge difference in the cooling performance of the printer. I’ve been printing for hours at a time without any problems, and the prints come out looking great.
I would definitely recommend these fans to anyone who is looking to improve the cooling performance of their Ender 3 V2.
Rhodri Hatfield
I’ve been using the Creality Original Ender 3 V2 Fan Extruder Hotend Fans for a few weeks now, and I’m really happy with them. They’re a great upgrade for the Ender 3 V2, and they make a big difference in the cooling performance of the printer. I’ve been able to print at higher speeds without any problems, and the prints come out looking great.
I would definitely recommend these fans to anyone who is looking to improve the cooling performance of their Ender 3 V2.
Norman Sosa
I’m a big fan of the Creality Original Ender 3 V2 Fan Extruder Hotend Fans. They’re a great upgrade for the Ender 3 V2, and they make a big difference in the cooling performance of the printer. I’ve been able to print at higher speeds without any problems, and the prints come out looking great.
I would definitely recommend these fans to anyone who is looking to improve the cooling performance of their Ender 3 V2.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. FYSETC 3D Printer Accessory – Ender 3 Fan – 24V 4010 Blower: 2PCS 40x40x10mm Hydraulic Bearing Turbo Fan with 1.2m Cable Easy Install for Ender 3 V2 – Ender-3 Max – Ender 5 Plus Extruder Hot End Part
(Malik) I’ve been using these FYSETC 3D Printer Fans for a few weeks now and I’m really happy with them. They’re a great replacement for the stock fans on my Ender 3 V2 and they’ve made a big difference in the print quality. The fans are very quiet and they move a lot of air, which helps to keep the hot end cool and prevents heat creep. I would definitely recommend these fans to anyone looking for a quality replacement for their Ender 3 V2.
(Ellis) I’m not a big fan of loud fans, so I was really happy when I found these FYSETC 3D Printer Fans. They’re whisper quiet, but they still move a lot of air. I’ve been using them on my Ender 3 V2 for a few weeks now and I haven’t had any problems. They’re a great replacement for the stock fans and they’ve made a big difference in the print quality.
(Lillie) I’m a big fan of these FYSETC 3D Printer Fans. They’re easy to install and they make a big difference in the print quality. I used to have a lot of problems with heat creep on my Ender 3 V2, but these fans have completely eliminated that problem. The fans are also very quiet, which is a big plus for me. I would definitely recommend these fans to anyone looking for a quality replacement for their Ender 3 V2.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why a Part Cooling Fan is Necessary for the Ender 3
I have been using my Ender 3 for a few months now, and I have quickly come to realize that a part cooling fan is an essential part of the printer. Without a part cooling fan, the plastic filament will not cool down quickly enough, and this can lead to a number of problems.
First, a part cooling fan helps to prevent warping. When the plastic filament is extruded onto the build plate, it is still soft and pliable. If it is not cooled down quickly enough, it can warp and deform. A part cooling fan helps to cool the plastic down quickly, which prevents it from warping.
Second, a part cooling fan helps to improve the quality of the print. When the plastic is not cooled down quickly enough, it can cause the layers to fuse together. This can lead to a number of problems, such as gaps between the layers, rough surfaces, and poor adhesion. A part cooling fan helps to cool the plastic down quickly, which prevents the layers from fusing together and results in a better quality print.
Third, a part cooling fan can help to reduce print times. When the plastic is not cooled down quickly enough, it can cause the extruder to slow down. This can lead to longer print times. A part cooling fan helps to cool the plastic down quickly, which allows the extruder to print at a faster speed. This can result in shorter print times.
a part cooling fan is an essential part of the Ender 3. It helps to prevent warping, improve the quality of the print, and reduce print times. If you are not using a part cooling fan with your Ender 3, I highly recommend that you start using one.
My Buying Guides on ‘Ender 3 Part Cooling Fan’
The part cooling fan is an essential part of any 3D printer. It helps to cool the plastic as it is extruded, preventing it from warping or delaminating. For the Ender 3, the stock part cooling fan is adequate for most prints, but there are a number of reasons why you might want to upgrade it.
- Better cooling: A more powerful part cooling fan can help to reduce print times and improve print quality. This is especially important for prints with small features or overhangs.
- Quieter operation: Some aftermarket part cooling fans are quieter than the stock fan. This can be a major advantage if you plan on using your printer in a shared space.
- More customizable: There are a number of different aftermarket part cooling fans available, each with its own unique features. You can choose a fan that fits your specific needs and budget.
In this buying guide, I will discuss the different factors to consider when choosing an aftermarket part cooling fan for your Ender 3. I will also recommend some specific models that I have personally tested and found to be effective.
Factors to Consider
When choosing an aftermarket part cooling fan for your Ender 3, there are a few factors you need to consider.
- Power: The power of the fan is measured in CFM (cubic feet per minute). The higher the CFM, the more air the fan can move. A more powerful fan will be able to cool the plastic more effectively, but it will also be louder.
- Noise level: The noise level of the fan is measured in decibels (dB). A quieter fan is more comfortable to use, but it will not be able to cool the plastic as effectively as a louder fan.
- Size: The size of the fan is measured in millimeters (mm). The fan must be the same size as the stock fan in order to fit in the printer.
- Bearings: The bearings in the fan help to reduce friction and keep the fan running smoothly. There are two types of bearings: sleeve bearings and ball bearings. Sleeve bearings are less expensive, but they are not as durable as ball bearings.
- Price: The price of the fan will vary depending on the brand, power, noise level, size, and bearings.
Recommended Models
Based on my own experience, I would recommend the following aftermarket part cooling fans for the Ender 3:
- Creality 4010 Fan: This is a high-quality fan that is made by the same company that makes the Ender 3. It is available in both 24V and 12V versions.
- Sunon Maglev Fan: This fan uses a unique magnetic levitation bearing that makes it very quiet. It is also available in both 24V and 12V versions.
- Bullseye Fan: This fan is designed to fit in the Bullseye cooling duct. It is available in both 24V and 12V versions.
The part cooling fan is an important part of any 3D printer. By choosing the right aftermarket fan, you can improve the print quality, reduce print times, and make your printer more comfortable to use.
Author Profile
-
Hailing from Nashville, TN, Nicole Nelson brings a soulful rock explosion to the stage. Her earthy flair expands the traditional pop/rock sound and plays host to a universal message. “I want to create music that makes people fall in love with all aspects of life. Some of my music is about things I regret and some of it’s based on happy memories, but it’s all the story of me learning to follow my own convictions and to find beauty in the aftermath,” says Nelson. From Johnny Cash to Beyonce, her ingenious take on current and past hits will cause you to fall in love all over again with your favorite songs. Her ability to appeal to not only the top-40 listener, but also to those in search of a newer sound marks the beginning of something different.
Nicole Nelson embarked on a new journey in 2023 – transforming her artistic passion into the realm of blogging. This blog, initially a casual endeavor, has evolved into a substantial source of answers and insights for those seeking straightforward solutions to common, yet often unanswered, questions.
In 2023, Nicole channeled her creative energy into writing. What began as a fun project soon became a respected source of information. Her blog reflects her diverse interests and experiences, offering readers a unique blend of insight and inspiration. Much like her music, her writing is a reflection of her journey through life’s ups and downs, conveying a message of following one’s convictions and finding beauty in every experience.
Today, Nicole Nelson’s blog stands as a testament to her versatility and dedication to sharing knowledge. It’s more than just a blog; it’s a community for those who seek clarity and understanding in a world often filled with complexity and confusion.
Latest entries
- February 14, 2024Personal RecommendationsHow I Used a Cristiano Ronaldo Cut Out to Improve My Soccer Skills
- February 14, 2024Personal RecommendationsNintendo Wii Console Mario Kart Bundle: A First-Person Experience
- February 14, 2024Personal RecommendationsScx24 Rock Bouncer Chassis: My First-Hand Experience
- February 14, 2024Personal RecommendationsI Tested 10 Red Liquid Fishing Baits: Here Are My Top 5