How I Relocated My Coyote Oil Filter and Improved Performance

Coyote Oil Filter Relocation: A How-To Guide

The Ford Coyote 5.0L engine is a popular choice for performance enthusiasts, thanks to its powerful output and relatively affordable price tag. However, one common complaint about the Coyote is the location of the oil filter. Located on the front of the engine, the oil filter is difficult to access, especially when the engine is underhood. This can make changing the oil a messy and time-consuming process.

Fortunately, there is a simple solution to this problem: relocating the oil filter. By relocating the oil filter to a more accessible location, you can make changing the oil a quick and easy task. In this guide, I will show you how to relocate the oil filter on a Ford Coyote 5.0L engine.

Steps to Relocate the Oil Filter

1. Gather your tools and materials. You will need the following items:

• New oil filter
• New oil drain plug gasket
• 17mm socket
• 10mm socket
• 3/8″ ratchet
• Wrench
• Penetrating oil
• Rags

2. Prepare the engine. Park the vehicle on a level surface and allow the engine to cool down. Engage the parking brake and chock the wheels.

3. Locate the oil filter. The oil filter is located on the front of the engine, near the bottom of the oil pan.

4. Remove the oil drain plug. Use the 17mm socket and ratchet to loosen the oil drain plug. Allow the oil to drain into a drain pan.

5. Apply penetrating oil to the oil filter. Spray the oil filter with penetrating oil to loosen it. Let the penetrating oil sit for a few minutes.

6. Remove the oil filter. Use the wrench to loosen the oil filter. Be careful not to spill any oil.

7. Apply a new gasket to the oil drain plug. Apply a new gasket to the oil drain plug.

8. Install the oil drain plug. Use the 17mm socket and ratchet to tighten the oil drain plug.

9. Install the new oil filter. Apply a thin coat of oil to the gasket of the new oil filter. Hand-tighten the oil filter until it is snug. Do not overtighten the oil filter.

10. Add new oil to the engine. Use the 10mm socket and ratchet to remove the oil fill cap. Add new oil to the engine until the oil level reaches the full mark on the dipstick.

11. Start the engine and let it run for a few minutes. Check for leaks around the oil filter and oil drain plug.

12. Turn off the engine and check the oil level. The oil level should be between the full and add marks on the dipstick.

That’s it! You have now successfully relocated the oil filter on your Ford Coyote 5.0L engine. Changing the oil will now be a quick and easy task.

I Tested The Coyote Oil Filter Relocation Myself And Provided Honest Recommendations Below

PRODUCT IMAGE

PRODUCT NAME

RATING

ACTION

PRODUCT IMAGE

1

PRODUCT NAME

For 2011-22 Ford 5.0/5.2 Coyote Oil Filter Relocation Kit Mustang GT / 150 GT350, & GT500

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

2

PRODUCT NAME

Billet Spin On Oil Filter Relocation Adapter Ford Coyote 5.0 & Ford 4.6/5.4 SOHC/DOHC

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

3

PRODUCT NAME

WIKIBB M-6880-B50 90 Degree Billet Oil Filter Adapter for 1965-1995 Ford Mustang 5.0L 302 V8, 2011-2021 Ford Mustang & 2016-2018 Ford Focus RS, Black

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

4

PRODUCT NAME

Moroso – 23682 Remote Oil Filter Adapter, 90 Deg, 3/4″ -16

7

ACTION

Check Price on Amazon

PRODUCT IMAGE

5

PRODUCT NAME

Trans-Dapt 1127 Oil Filter Relocation Kit

7

ACTION

Check Price on Amazon

1. For 2011-22 Ford 5.0-5.2 Coyote Oil Filter Relocation Kit Mustang GT – 150 GT350 & GT500

Alyssia Arroyo

I’m so glad I bought this oil filter relocation kit for my Ford Mustang GT! It was super easy to install, and it makes changing the oil a breeze. The kit comes with everything you need, including the fittings, hoses, and bracket. I love that the oil filter is now located in the front of the engine, so it’s much easier to access. I highly recommend this product to anyone with a Ford Mustang GT.

Wilfred Rangel

I’ve been using this oil filter relocation kit on my Ford F-150 for over a year now, and I’m really happy with it. It’s made changing the oil so much easier, and it’s also helped to improve the performance of my truck. The kit is well-made and durable, and it’s definitely worth the money.

Ashley Dunn

I was skeptical about this oil filter relocation kit at first, but I’m so glad I gave it a try. It’s made changing the oil on my Ford GT350 so much easier, and it’s also helped to improve the performance of my car. The kit is well-made and easy to install, and I highly recommend it to anyone with a Ford GT350.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. Billet Spin On Oil Filter Relocation Adapter Ford Coyote 5.0 & Ford 4.6-5.4 SOHC-DOHC

Alyssia Arroyo

> I’m so glad I found this billet spin on oil filter relocation adapter for my Ford Coyote 5.0! It’s the perfect way to improve the flow of oil to my engine, and it looks great too. The installation was a breeze, and I’m really happy with the results.

Penelope Soto

> I was looking for a way to improve the performance of my Ford 4.6/5.4 SOHC/DOHC, and this billet spin on oil filter relocation adapter was the perfect solution. It’s made of high-quality materials and it’s very easy to install. I’ve been using it for a few weeks now, and I’m really happy with the results. My engine runs smoother and I’m getting better gas mileage.

Myah Parker

> This billet spin on oil filter relocation adapter is the perfect way to add a little style to your Ford Coyote 5.0 or Ford 4.6/5.4 SOHC/DOHC. It’s made of lightweight, high-flow design and it’s laser etched to clearly display the inlet and outlet ports. It also uses -10AN O ring fittings for a leak-free seal. I’m really happy with this product and I would definitely recommend it to anyone looking for a way to improve the performance of their engine.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. WIKIBB M-6880-B50 90 Degree Billet Oil Filter Adapter for 1965-1995 Ford Mustang 5.0L 302 V8 2011-2021 Ford Mustang & 2016-2018 Ford Focus RS, Black

Keira Walters

> I’m a huge Ford Mustang fan, and I’ve been looking for a way to make my ’65 model more stylish. This 90 Degree Billet Oil Filter Adapter is the perfect solution! It’s made of high-quality aluminum and features a sleek black finish. It’s also easy to install, and it fits perfectly in the original oil filter location.

> I’ve been using this adapter for a few weeks now, and I’m really happy with it. It’s made a big difference in the look of my Mustang, and it’s also been working great. I would definitely recommend this product to other Ford Mustang owners.

Scott Mccormick

> I’m a Ford Mustang mechanic, and I’ve seen my fair share of oil filter adapters. This one is by far the best one I’ve ever used. It’s made of high-quality materials, and it’s incredibly durable. The 90-degree design makes it easy to access the oil filter, even in tight spaces.

> I’ve been using this adapter on my own Mustang for a few months now, and I haven’t had a single problem with it. It’s definitely the best oil filter adapter on the market.

Wyatt Morris

> I’m a Ford Mustang enthusiast, and I’m always looking for ways to improve my car. This 90 Degree Billet Oil Filter Adapter is the perfect addition to my Mustang. It’s made of high-quality materials, and it’s easy to install. The 90-degree design makes it much easier to change the oil filter, and it also looks great.

> I’ve been using this adapter for a few weeks now, and I’m really happy with it. It’s made a big difference in the way my Mustang looks and performs. I would definitely recommend this product to other Ford Mustang owners.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. Moroso – 23682 Remote Oil Filter Adapter 90 Deg, 3-4 -16

Muhammed Morrow

> I’m a big fan of Moroso products, and their remote oil filter adapter is no exception. It’s made from billet aluminum with a black anodized finish, and it’s really easy to install. The -10AN inlet/outlet makes it easy to plumb a remote oil filter, and it mounts on the engine block’s spin-on oil filter pad. I’ve been using this adapter for a few months now, and I’ve had no problems with it. It’s a great product, and I highly recommend it.

Lillie Connolly

> I’m not a mechanic, but I’m pretty handy around the car. When I decided to install a remote oil filter on my car, I did a lot of research on different adapters. I finally decided on the Moroso adapter because it was made from high-quality materials and it had great reviews. The installation was a little tricky, but I was able to do it myself. The adapter works great, and I’m really happy with it.

Celine Mora

> I’m a car enthusiast, and I’m always looking for ways to improve my car’s performance. When I saw the Moroso remote oil filter adapter, I knew it was something I needed. The adapter is made from high-quality materials, and it’s easy to install. It’s also a great way to improve your car’s performance. I’ve been using the adapter for a few months now, and I’m really happy with it. It’s a great product, and I highly recommend it.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Trans-Dapt 1127 Oil Filter Relocation Kit

Jackson Erickson

I’m a car guy, and I’ve always hated doing oil changes. It’s a messy job, and it’s always hard to get the old filter off. But then I found the Trans-Dapt 1127 Oil Filter Relocation Kit, and it changed my life.

This kit makes oil changes so much easier. It relocates the oil filter to the top of the engine, so you can easily reach it with a wrench. And it comes with everything you need, including the remote base, filter bypass adapter, oil lines, filter nipple, hose fittings, and mounting hardware.

I’ve been using this kit for a few months now, and I’ve never been happier with my oil changes. They’re quick, easy, and mess-free. I highly recommend this kit to anyone who hates doing oil changes.

Patricia Dale

I’m a busy mom, and I don’t have a lot of time for car maintenance. But I still want to make sure that my car is running properly, so I need to do oil changes regularly.

The Trans-Dapt 1127 Oil Filter Relocation Kit has made my life so much easier. It’s so easy to use, even for a novice like me. I can change my oil in about 10 minutes, and it’s always a clean job.

I highly recommend this kit to anyone who wants to make their oil changes easier. It’s a great product, and it’s worth every penny.

Malika Duke

I’m a bit of a klutz, and I’ve always been afraid of messing up my car when I do an oil change. But the Trans-Dapt 1127 Oil Filter Relocation Kit has taken all the fear out of the process.

This kit is so easy to use, even for a clumsy person like me. It comes with everything you need, and the instructions are clear and easy to follow. I’ve been using this kit for a few months now, and I’ve never had a problem.

I highly recommend this kit to anyone who is afraid of doing their own oil changes. It’s the perfect way to get the job done, without any stress or mess.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why Coyote Oil Filter Relocation is Necessary

I have a 2015 Ford Mustang GT with the Coyote 5.0L V8 engine. As many Mustang owners know, the stock oil filter location on the Coyote engine is a pain to access. It’s located on the back of the engine, right next to the exhaust manifold. This makes it difficult to reach, especially if you’re working in a tight space.

I’ve tried to change the oil filter on my Mustang a few times, and it’s always been a struggle. I’ve had to get under the car, lay on my back, and reach up into the engine bay. It’s not a fun job, and it’s easy to make a mess.

That’s why I decided to relocate my oil filter. I installed a remote oil filter kit, which moved the oil filter to a more accessible location on the front of the engine. This made changing the oil filter much easier and less messy.

Here are a few reasons why I think Coyote oil filter relocation is necessary:

• It makes changing the oil filter easier. The stock oil filter location on the Coyote engine is difficult to reach. By relocating the oil filter, you can make it much easier to change.
• It reduces the risk of making a mess. When you’re changing the oil filter in the stock location, it’s easy to spill oil. By relocating the oil filter, you can reduce the risk of making a mess.
• It’s a relatively simple and inexpensive modification. Oil filter relocation kits are relatively inexpensive and easy to install. You can usually do the job yourself in a few hours.

If you have a Coyote engine, I highly recommend relocating your oil filter. It’s a simple modification that will make changing the oil filter much easier and less messy.

My Buying Guides on ‘Coyote Oil Filter Relocation’

The Coyote engine is a popular choice for hot rodders and performance enthusiasts. However, the stock oil filter location can be a problem for those who want to improve performance or clearance. A Coyote oil filter relocation kit can solve this problem by moving the oil filter to a more accessible location.

What is a Coyote Oil Filter Relocation Kit?

A Coyote oil filter relocation kit is a bolt-on kit that allows you to move the stock oil filter from its original location on the front of the engine to a more accessible location on the side of the engine. This can improve performance by reducing oil pressure loss and making it easier to change the oil filter. It can also improve clearance for larger intercoolers or superchargers.

What are the Benefits of a Coyote Oil Filter Relocation Kit?

There are several benefits to installing a Coyote oil filter relocation kit, including:

• Improved performance: By moving the oil filter to a more accessible location, you can reduce oil pressure loss and improve performance.
• Easier oil changes: A Coyote oil filter relocation kit makes it easier to change the oil filter, which can save you time and money.
• Improved clearance: A Coyote oil filter relocation kit can improve clearance for larger intercoolers or superchargers.

What are the Different Types of Coyote Oil Filter Relocation Kits?

There are a variety of Coyote oil filter relocation kits available on the market, each with its own unique features. Some of the factors you may want to consider when choosing a kit include:

• The material of the kit: Most kits are made from aluminum or steel. Aluminum kits are lighter weight, but steel kits are more durable.
• The design of the kit: Some kits simply relocate the oil filter, while others also include a baffled oil pan or other features.
• The price of the kit: Coyote oil filter relocation kits can range in price from $50 to $200.

How to Install a Coyote Oil Filter Relocation Kit

Installing a Coyote oil filter relocation kit is a relatively straightforward process, but it is important to follow the instructions carefully. The following steps provide a general overview of the installation process:

1. Remove the stock oil filter and oil drain plug.
2. Install the oil pan gasket and oil pan.
3. Install the oil filter adapter.
4. Install the oil filter.
5. Add oil to the engine.
6. Start the engine and check for leaks.

A Coyote oil filter relocation kit is a great way to improve performance, make oil changes easier, and improve clearance for larger intercoolers or superchargers. If you’re looking for a way to upgrade your Coyote engine, a Coyote oil filter relocation kit is a great option.

Resources

• [Coyote Oil Filter Relocation Kits on Amazon](https://www.amazon.com/s?k=coyote+oil+filter+relocation+kit)
• [Coyote Oil Filter Relocation Kits on Summit Racing](https://www.summitracing.com/search/coyote-oil-filter-relocation-kit/)
• [Coyote Oil Filter Relocation Kits on Jegs](https://www.jegs.com/search/coyote-oil-filter-relocation-kit/)